F104 ADJUSTABLE ARM MOUNT PLATES
Light weight carbon fiber inner mount for the Exotek adjustable arm set. Replaces the heavier Tamiya alloy mount. Tamiya F104 alloy mount set = 9 grams, Exotek carbon mount set = 3 grams.
F104v2 TRF SHOCK MOUNT PLATE
Lightweight carbon fiber TRF Shock mounting plate for the F104v2.
This new design is designed also for the TRF damper which helps improve rubber tire grip. The plate allows hassle free mounting of the damper for perfect rear pod droop and perfect centered ball end position. On the stock unit you must add internal spacers inside the TRF shock and must add a spacer on the pivot ball to align the shock to center. The Exotek plate is also more secure and will reliably stay in perfect alignment on the posts.
Now to adjust droop you simply adjust it via the damper ball cup (tighten or loosen ball cup).
The forward hole is for mounting the standard small F104v2 damper.
The rear hole is for mounting the option TRF damper.
The plate system only weighs 1.5gr!
F104v2 FLEX CHASSIS SET 2.5MM
NEW 2.5MM Flex type chassis set for the F104v2.
The slightly thinner chassis increases overall front and rear grip and helps reduce traction roll- excellent for rubber tire racing!
The chassis also updates the side links to an angled geometry to increase rear pod traction. The angled links reduces link binding when the rear pod is articulated. The chassis also retains the stock location holes for added tuning.
Added to the chassis is a 3rd position battery stop location. This allows a small ESC to be mounted in back, a shorty pack in the middle and the receiver at the front- the preferred location for asphalt racing.
The chassis set also includes a new design 2.5mm thick rear pod plate. The pod plates adds 2 slots for better side link performance. The stock side links now have better clearance in order to prevent the links from bowing and bending like on the stock plate when the rear pod suspension is performing its duties.
Included also is a 1mm spacer for the front to make sure the front wing does not scrape on the ground.
Made in the USA of bi-directional (more flex) carbon fiber.
Tamiya chassis set = 64 grams
Exotek chassis set (w/ spacer) = 57 grams